If
you plan on using any of the beadlock wheels with stock Monster
GT tires you must do this simple modification to each tire. Use
a hobby knife to carefully remove the 2 thin inner beads from each
tire. I recommend holding the knife so you are cutting away from
yourself. Gently pull the bead providing tension while you cut.
The slight tension makes the rubber easier to cut. Remember to take
your time. Try to make one slow and steady cut around the entire
bead. If you do this correctly you will end up with two rubber band
looking pieces from each tire.
Top
| Home | Contact
Copyright
AJS Machine & Manufacturing.
T-MAXX is a registered trademark of Traxxas.
Savage is a registered trademark of HPI Racing.
Monster GT is a registered trademark of Team Associated.
Design and Ecommerce Development by apollo
19 media.
If
you plan on using any of the beadlock wheels with stock Monster
GT tires you must do this simple modification to each tire. Use
a hobby knife to carefully remove the 2 thin inner beads from each
tire. I recommend holding the knife so you are cutting away from
yourself. Gently pull the bead providing tension while you cut.
The slight tension makes the rubber easier to cut. Remember to take
your time. Try to make one slow and steady cut around the entire
bead. If you do this correctly you will end up with two rubber band
looking pieces from each tire.